Surge Protection for Industrial Control Panels (UL 508A) 

UL508A Main

UL 508A Industrial Control Panel

OVERVIEW

Today's increased reliance on very sensitive electronics makes surge protection an important topic for Industrial Control Panels listed to UL 508A. The Insurance Institute for Business & Home Safety study found that $26 billion dollars was lost due to non-lightning power surges. In addition, there are about 25 million lightning strikes in the US each year that cause between $650M to $1B in losses according to the Insurance Information Institute, State Farm©.  

Selecting SPDs for UL 508A Industrial Control Panels

NEC/NFPA 70 require that Surge Protective Devices (SPDs) shall be UL 1449 Listed. This means selecting a surge protector is easier than it has ever been. There are only a few choices available for SPDs that are UL Listed for any of the most commonly used surge standards including UL 1449 5th Edition, UL 497B and UL 497E.  

Location

Equipment

System

Surge Protector Model #

Link

Main-Panel

Main Panelboard

480 V ac

MDS750E-480D

MDS750E-480D

 

Location

Equipment

System

Surge Protector Model #

Link

MCC Allen Bradley

PLC Cabinet

120-240 V ac
Power Input

DAC82US-240T/NN

DAC102US-240T-NN

P/S

24 V dc
Power Output

DS220S-24DC

Analog
Sensors

4-20mA

DLA-24D3

DLA-24D3 v.2

Discrete I/O

RS-485

DLA-12D3

DLA-24D3 v.2

Network
Switch

Ethernet
Cat 6A

MJ8-C6A

MJ8-C6A

Radio
Transmitter

SCADA
Wireless

P8AX09-6G-N/FF

P8AX09-6G-N-FF

 

Location

Equipment

System

Surge Protector Model #

Link

MCC

Motor Control
Center

480 V ac
Power Input

DAC104US-480D

DAC100US

Power Supply

120-240 V ac
Power Input

DAC102US-240T/NN

DAC102US-240T-NN

P/S

24V dc
Power Output

DS220S-24DC

DS220S-24DC

Analog
Sensors

4-20mA

DLA-24D3

DLA-24D3 v.2

Discrete I/O

RS-485

DLA-12D3

DLA-24D3 v.2

Network
Switch

Ethernet
Cat 6A

MJ8-C6A

MJ8-C6A

 

Location

Equipment

System

Surge Protector Model #

Link

Motor 200hp

Motor

480 V ac
Power Input

M50-480D-A

M50-A

0-240 V ac
Relay Input

DAC101US-275

DAC101US-275

 

Determining the Acceptability of an SPD for UL 508A Industrial Control Panels and All Other UL Listed Equipment

The UL inspector will first consider the SPD type when determining it’s acceptability for a given application or piece of equipment. This will include UL 508A as well as all other UL Listed equipment. The first level compliance is based on the UL Approval (LISTED or RECOGNIZED) of the SPD or UL SPD Type and its Suitable Ratings. This means that it has to meet all safety, performance, environmental and electrical system ratings of the application. If any of these criteria are not fully met, it will require a Procedure Description, a File Update and/or Additional Testing. These actions will require additional costs that may be substantial. For this reason, it is in the interest of the specifier to use UL LISTED SPDs to eliminate any uncertainty or to make sure the UL RECOGNIZED SPD is selected at the time of UL submittal of the equipment. 

Approval Considerations Table Based on UL SPD Type  

UL Mark

UL 1449 5th Ed. SPD Type

Suitable Ratings

Procedure Described

File Update or Additional Testing

Notes

  UL logo png

 1

 2

 Yes 

 No

 No

The only requirement is that the SPD must match electrical and environmental ratings of the UL 508A Control Panel.

A UL field inspection of the control panel with the SPD installed is required as a part of a standard follow-up service visit.

  UR logo png

 1CA

 2CA

 4CA

 5

 Yes

 Yes

 Yes

Yes – All UL recognized SPDs require a UL engineering evaluation of the SPD’s existing UL 1449 E–file.

This will result, at a minimum, in a cost to update the UL file and may also require testing that would result in additional costs.