Schneider Electric SSP02CDSE20A1
Comparison
CITEL MP200F-120Y Surge Protective Device (SPD)

CITEL MP200F-120Y Surge Protector	SSP02CDSE20A1 Surge Protector
Intended Application System
System Voltage	120/208Vac
Number of Phases	3
Conductors	4W+G
Configuration	AC

PRODUCT COMPARISON TABLE

This page collects publicly available data from ul.com and assembles a side by side reference table for a convenient product cross reference.

Brand
Manufacturer	CITEL AMERICA INC	Schneider Electric
UL File #	E326289	-
Model	MP200F-120Y	SSP02CDSE20A1
Product Image
UL.com Ratings -	-
UL APPROVAL	-	-
UL MARK	-	-
SPD Type	UL1449 5th Ed. Type 1	-
Volt (V)	120/208	208Y/120
AC/DC DC PV	AC	AC
Phase	3	3
Amps (A)	n/a	n/a
Ambient Min (C)	-35	-
Ambient Max (C)	+85	-
Mode	WYE	WYE
VPR (Vpk)
L-L L-N L-G N-G	1000 700 700 700	600 700 700 1000
MCOV
L-L L-N L-G N-G	300 150 150 150	- - - -
In (kA)	20	20
SCCR (kA)	150	200
Additional Data Sheet Ratings
Surge Current Rating (kA) per phase	200	100
Protection Circuit	Multi-TMOV	Coordinated Fuse Technology
Leakage Current	Yes	-
TOV Optimized	No	-
Diagnostics	LED Indicators	Audible and visual indicatiors
Environmental Rating	Polycarbonate NEMA 4X (IP67)	NEMA 4X
# of Wires	5	5
Modes of Protection	Common Mode Differential Mode	Common Mode Differential Mode
Warranty	10-years	-

Determining the acceptability of an SPD for your UL equipment

(for UL 508A Control Panels and All Other UL Listed Equipment)

The UL inspector will first consider the SPD type when determining it’s acceptability for a given application or piece of equipment. This will include UL 508A as well as all other UL Listed equipment. The first level compliance is based on the UL Approval (LISTED or RECOGNIZED) of the SPD or UL SPD Type and it’s Suitable Ratings. This means that it has to meet all safety, performance, environmental and electrical system ratings of the application. If any of these criteria are not fully met, it will require a Procedure Description, a File Update and/or Additional Testing. These actions will require additional costs that may be substantial. For this reason, it is in the interest of the specifier to use UL LISTED SPD’s to eliminate any uncertainty or to make sure the UL RECOGNIZED SPD is selected at the time of UL submittal of the equipment.

Approval Considerations Table based on UL SPD Type

UL Mark	UL1449 SPD Type	Suitable Ratings	Procedure Described	File Update or Additional Testing	Notes
	1 2	Yes	No	No	The only requirement is that the SPD must match electrical and environmental ratings of the UL 508A Control Panel. A UL field inspection of the control panel with the SPD installed is required as a part of a standard follow-up service visit.
	1CA 2CA 4CA 5	Yes	Yes	Yes	Yes – All UL recognized SPD’s require a UL engineering evaluation of the SPD’s existing UL1449 E–file. This will result, at a minimum, in a cost to update the UL file and may also require testing that would result in additional costs.

10108 USA Today Way Miramar, FL 33025 USA	Contact us to develop a surge mitigation solution for your application
www.citel.us	Where to purchase Citel SPD's