UL 1449 5th Edition SPD Overview

What is UL 1449 5th Edition?

Published by one of the leading consumer safety organizations in the United States, Underwriter Laboratories' standard 1449 outlines safety standards and classifications for Open-Type and Enclosed Surge Protective Devices (SPDs) used in 50 and 60 Hz power circuits not exceeding 1000 V ac and PV applications not exceeding 1500 V dc.

SPD Classifications Under UL 1449

There are six distinct categories of SPDs outlined in UL 1449 called Types:

UL Type 1

Line or Load Side, No additional over current protection device required

UL Type 2

Load Side Main Service Disconnect

UL Type 3

Point-of-Utilization Devices

UL Type 4

Component Assemblies, Tested Type 1, 2, or 3 locations

UL Type 5

Discrete Component Suppressors

SPDs within each type are further broken down by their design and certification level.

Listed vs. Recognized

UL 1449 looks at the method and extent of certification a given SPD of any type has been subjected to.

Listed

Recognized

  • Approved as a complete product

Finished device suitable for field installation without requiring further evaluation

  • Easier code and inspector acceptance

  • Not as many conditions of acceptability to evaluate

  • Known performance Ratings for SCCR, VPR, In-Published in UL File

  • Reduced engineering and documentation burden

CITEL's goal is to primarily offer a Listed SPD, with a Type 1 Listed rating meaning it can be used in any location.

  • Recognized SPD are typically integrated into larger end products

  • OEM products Subject to Conditions of Acceptability that manufacturer must satisfy

  • Must be Factory installed

Rule of Thumb

  • SPD intended for a facility or electrical panel – UL Listed SPD simplifies approval and usage

  • OEM Equipment- Recognized SPD may be more appropriate

Open-type and Enclosed

The design of an SPDs enclosure is another quality UL 1449 considers in its classification.

Open-type SPDs are those with an incomplete or partial enclosure equipped with field wiring terminals and/or leads. These are only suitable for field installation if paired with an appropriate enclosure, in accordance with the National Electrical Code (NEC), ANSI/NFPA 70.

Enclosed SPDs by contrast include an enclosure suitable for field installation per the NEC/NFPA 70's requirements.

UL & the World of Surge Protection

The National Electrical Code (NEC)/NFPA 70, the guiding standard for electrical design, installation, and inspection in residential, commercial, and industrial settings, references UL 1449 Listed SPDs. This is one of the many ways UL 1449 is connected to the greater ecosystems of safety organizations and industry committees.

As Your Expert in Surge Protection, CITEL has accrued a wealth of industry knowledge and connections through decades of participation in this ecosystem. Learn more about our collaboration within the industry here.